This save system doesn't work.

Page: 1 2
ID:157490
 
Feb 27 2010, 1:21 pm (Edited on Feb 27 2010, 5:15 pm)
How would I go about fixing this save system. It doesnt work at all =(. This is only 1 out of 3 of these things some of them are basically copied and changed from A to either B or C. But this doesn't work.
mob/proc
    ASave()
        var/savefile/A = new("saves/[src.key]_A.sav")   //creates a new savefile or overwrites an old one
        A["X"]<<src.X   //this saves a variable to the savefile, the << point at where youre sending the data
        A["Y"]<<src.Y
        A["Z"]<<src.Z
        A["dir"]<<src.dir
        A["icon_state"]<<src.icon_state
        A["contents"]<<src.contents
        A["Stamina"]<<src.stamina
        A["MaxStamina"]<<src.maxstamina
        A["Wounds"]<<src.wounds
        A["MaxWounds"]<<src.maxwounds
        A["Chakra"]<<src.chakra
        A["MaxChara"]<<src.maxchakra
        A["Current_Exp"]<<src.Exp
        A["NextExp"]<<src.Nexp
        A["Account_Made"]<<ACCmade
    LoadA()
        if(fexists("saves/[src.key]_A.sav"))
            var/savefile/A = new("saves/[src.key]_A.sav")
            var/X
            var/Y
            var/Z
            A["yourX"]>>X
            A["yourY"]>>Y
            A["yourZ"]>>Z
            A["dir"]>>src.dir
            A["icon_state"]>>src.icon_state
            A["contents"]>>src.contents
            A["Stamina"]>>src.stamina
            A["MaxStamina"]>>src.maxstamina
            A["Wounds"]>>src.wounds
            A["MaxWounds"]>>src.maxwounds
            A["Chakra"]>>src.chakra
            A["MaxChara"]>>src.maxchakra
            A["Current_Exp"]>>src.Exp
            A["NextExp"]>>src.Nexp
            A["Account_Made"]>>ACCmade
            src.loc=locate(X,Y,Z)
            return 1
        else    return 0

client
    Del()
        if(src.mob)
            if(Aactive == 1)
                src.mob.ASave()
mob/verb
        Delchar()
            set hidden = 1
            switch(input("Select a Character to delete.", text) in list ("Character 1","Character 2","Character 3","Nevermind"))
                if("Character 1")
                    switch(input("Are you sure you want to delete character 1?", text) in list ("No","Yes"))
                        if("No")
                            return
                        if("Yes")
                            var/savefile/A
                            del(A)

        Loadchar()
            set hidden = 1
            winshow(src, "newload", 0)
            winshow(src, "loading", 1)
            switch(input("Select a Character to load.", text) in list ("Character 1","Character 2","Character 3","Nevermind"))
                if("Character 1")
                    src.stunned = 0
                    winshow(src, "loading", 0)
                    winshow(src, "default", 1)
                    LoadA()
                    src.stunned = 0
                //  var/savefile/A = Read("saves/[src.key]_A.sav")
                    Cactive = 0
                    Bactive = 0
                    Aactive = 1
                    new/obj/card1(src.client)
                    new/obj/card2(src.client)
                    new/obj/card3(src.client)
                    new/obj/card4(src.client)
                    new/obj/card5(src.client)
                    new/obj/card6(src.client)
                    new/obj/card7(src.client)
                    new/obj/card8(src.client)
                    new/obj/card9(src.client)
                    new/obj/card0(src.client)

/var/Cactive = 0
/var/Bactive = 0
/var/Aactive = 0
/var/ACCmade = 0
mob
    verb
        clicktitlescreen()
            set hidden = 1
            winshow(src, "Entrance2", 0)
            winshow(src, "newload", 1)
    verb
        Newchar()
            set hidden = 1
            winshow(src, "newload", 0)
            winshow(src, "default", 1)
            switch(input("Select a slot to create your character in.", text) in list ("Character 1","Character 2","Character 3","Nevermind"))

                if("Character 1")
                    if(ACCmade == 1)
                        return
                        alert("You already have a character in slot 1!")
                    else
                        ACCmade = 1
                        Cactive = 0
                        Bactive = 0
                        Aactive = 1
                        src.stunned = 0
                        src.loc = locate(8,35,1)
                        src.icon = 'mob.dmi'
                        src.icon_state = "walk"
                        src.density=1
                        new/obj/card1(src.client)
                        new/obj/card2(src.client)
                        new/obj/card3(src.client)
                        new/obj/card4(src.client)
                        new/obj/card5(src.client)
                        new/obj/card6(src.client)
                        new/obj/card7(src.client)
                        new/obj/card8(src.client)
                        new/obj/card9(src.client)
                        new/obj/card0(src.client)
Feb 27 2010, 2:44 pm
Feb 27 2010, 2:47 pm
I'm gonna assume you get some errors from this. And by some I mean a lot, cause I can see 2 just from browsing the first 2 functions.

So yeah, post errors please.
Feb 27 2010, 3:09 pm (Edited on Mar 13 2010, 9:38 am)
In response to Keeth


Garthor, can you show me an example of what you mean here:

No. You would call Save() with a different argument to save in a different directory in the savefile. Save(1) saves in directory "1", Save(294) saves in directory "294", and Save("Bacon") saves in directory "Bacon".

There is no particular reason to actually have three separate files instead of just three directories in the same savefile.

Like, actually make that part save in a different file if a different key was active.
Feb 27 2010, 3:22 pm
In response to Darkjohn66
Maybe you should respond to Garthor's post so he knows you responded to him, instead of responding to mine.

I'd also suggest doing what Garthor suggested, because what you have there doesn't look very good at all.
Feb 27 2010, 4:42 pm (Edited on Feb 27 2010, 4:49 pm)
In response to Darkjohn66
Garthor wrote:
client
>   proc
>     Save(var/slot)
>       var/savefile/F = new("[ckey].sav")
>       F["[slot]"] << mob
>     Load(var/slot)
>       var/savefile/F = new("[ckey].sav")
>       F["[slot]"] >> mob
> 
> mob
>   Write(var/savefile/F)
>     ..()
>     F["x"] << x
>     F["y"] << y
>     F["z"] << z
>   Read(var/savefile/F)
>     ..()
>     loc = locate(F["x"], F["y"], F["z"])





With this code that Garthor provided, you can call client.Save("Slot1") and it will save the Slot 1 into a directory in the save file instead of having multiple files for slots X Y and Z.

This would mean each player would have 1 save file that was named after their ckey.sav.


What you are doing with the code snip it that you originally posted is saving only the verbs you specify rather than using the built in write proc to save every non-default/non-temp variable.

---

In your code above there are many errors such as calling returns before the code completes, not checking to see if you can actually load the character before trying to load and set it to logged in. You will need to be more specific at what is going wrong and where to help you narrow down your problems.
Feb 27 2010, 7:52 pm
In response to Garthor
Im sorry I am confused. Can you show me exactly where in that code I would put client.Save("slot1")
Feb 27 2010, 8:12 pm
In response to Darkjohn66
Nowhere.

Oh wait, SHOW you? Okay:

client
  proc
    Save(var/slot)
      var/savefile/F = new("[ckey].sav")
      F["[slot]"] << mob
    Load(var/slot)
      var/savefile/F = new("[ckey].sav")
      F["[slot]"] >> mob

mob
  Write(var/savefile/F)
    ..()
    F["x"] << x
    F["y"] << y
    F["z"] << z
  Read(var/savefile/F)
    ..()
    loc = locate(F["x"], F["y"], F["z"])
Mar 12 2010, 7:00 pm (Edited on Mar 13 2010, 9:45 am)
In response to Garthor
How would I go about using an If statement to decide whether slot 1 or slot 2 was loaded and write to the proper slot? Thanks for the help by the way! I will keep trying to figure this out as best I can.
--<small>I realized my foolish mistakes I had made.</small>

Edit- Ok Garthor, didn't realize it would be that simple. Should I make it a tmp variable?

I am going to attempt to make something where I could get the first letter of a person's key and have it save in the corresponding folder.
Mar 12 2010, 7:19 pm
In response to Darkjohn66
By using a variable to keep track of it? I mean, it's right there when you load, so just stick that in a variable and use that variable when you need to save.
Mar 13 2010, 1:54 pm
In response to Garthor
Am I going about this the proper way?

mob/proc/load()
    input("Select a character slot to load") in list ("1","2","3","4")
    if("1")
        var/savefile/F
        var/slot
        if(fexists(F["[slot]"]))
            Read(F["[slot]"])
            ..()
                        
mob/proc/delete()

client
  proc
    Save(var/slot)
      var/savefile/F = new("[ckey].sav")
      F["[slot]"] << mob
    Load(var/slot)
      var/savefile/F = new("[ckey].sav")
      F["[slot]"] >> mob

mob
  Write(var/savefile/F)
    ..()
    F["x"] << x
    F["y"] << y
    F["z"] << z
  Read(var/savefile/F)
    ..()
    loc = locate(F["x"], F["y"], F["z"])
    return
Mar 13 2010, 4:01 pm
In response to Darkjohn66
No. First of all, you should not be calling Read() directly. You should be using the >> operator or, instead, just calling the client/Load() proc which is defined right there for you. Next, you aren't actually opening the savefile (but if you call Load() it'll do that for you). Also, you aren't actually putting anything into the "slot" variable. Oh, and if("1") is always going to be true. You might have meant to put a switch statement there, but that's silly anyway because you might as well just store the result of the input in a variable and call Load() with that.

Oh, and I just noticed: fexists() isn't going to tell you if a directory in a savefile (which you haven't even opened yet) exists. You'd need to search F.dir for that.
Mar 14 2010, 8:22 am
In response to Garthor
Why is a slot variable being defined inside of the Load parentheses. Wouldn't this just cause me to only be able to search for the variable slot?
Mar 14 2010, 9:25 am (Edited on Mar 15 2010, 12:04 am)
In response to Darkjohn66
Er...Hopefully this is good?
var/slot
mob/proc/load()
    input(src,"Select a character slot to load")in list("1","2","3","4")
    if("1")
        var/savefile/F
        slot = 1
        if("[slot]" in F.dir)
            F["[slot]"] >> src
            ..()
        else
            return
            src << "No File is present."

mob/proc/delete()

client
  proc
    Save(slot)
      var/savefile/F = new("[ckey].sav")
      F["[slot]"] << mob
    Load(slot)
      var/savefile/F = new("[ckey].sav")
      F["[slot]"] >> mob

mob
  Write(var/savefile/F)
    ..()
    F["x"] << x
    F["y"] << y
    F["z"] << z
  Read(var/savefile/F)
    ..()
    loc = locate(F["x"], F["y"], F["z"])
    return
    
    
mob/Login()
    src.loc = locate(/turf/Login)
    ..()
mob/Logout()
    var/savefile/F
    F["[slot]"] >> src
    view () << "[src.ckey] has logged out!"
    ..()

turf
    screen
        Load
            Click(var/mob/M)
                M.load()
                return

edit-Ok I'll test it first, I probably should have *hits self in head*.
Mar 14 2010, 12:12 pm
In response to Darkjohn66
I'm not going to help you if you don't even bother to take ten seconds to test the code yourself.
Apr 2 2010, 2:32 pm
In response to Garthor
I am getting a null error. Man, this save system stuff is tough. Well, here's what I've got. Any help is appreciated.


mob/verb/Newchar()
    set hidden = 1
    switch(input(src,"Select a slot to create a new character in(old ones will be overwritten if selected)", "New Character", text)in list("1","2","3","4","Nevermind"))
        if("1")
            switch(input(src, "Are you sure?","?",text)in list("Yes","Nevermind"))
                if("Yes")
                    slot = 1
                    client.Load(slot)
                    winshow(src, "newload", 0)
                    winshow(src, "default", 1)
                    ..()
                else
                    return
        if("2")
            switch(input(src, "Are you sure?","?",text)in list("Yes","Nevermind"))
                if("Yes")
                    slot = 2
                    client.Load(slot)
                    winshow(src, "newload", 0)
                    winshow(src, "default", 1)
                    ..()
                else
                    return
        if("3")
            switch(input(src, "Are you sure?","?",text)in list("Yes","Nevermind"))
                if("Yes")
                    slot = 3
                    client.Load(slot)
                    winshow(src, "newload", 0)
                    winshow(src, "default", 1)
                    ..()
                else
                    return
        if("4")
            switch(input(src, "Are you sure?","?",text)in list("Yes","Nevermind"))
                if("Yes")
                    slot = 4
                    client.Load(slot)
                    winshow(src, "newload", 0)
                    winshow(src, "default", 1)
                    ..()
                else
                    return
        if("Nevermind")
            return
mob/verb/Loadchar()
    set hidden = 1
    switch(input(src,"Select a character slot to load", "Slots", text)in list("1","2","3","4","Nevermind"))
        if("1")
            slot = 1
            client.Load(slot)
            winshow(src, "newload", 0)
            winshow(src, "default", 1)
            ..()
        if("2")
            slot = 2
            client.Load(slot)
            winshow(src, "newload", 0)
            winshow(src, "default", 1)
            ..()
        if("3")
            slot = 3
            client.Load(slot)
            winshow(src, "newload", 0)
            winshow(src, "default", 1)
            ..()
        if("4")
            slot = 4
            client.Load(slot)
            winshow(src, "newload", 0)
            winshow(src, "default", 1)
            ..()
        if("Nevermind")
            return
mob/verb/Delchar()
    set hidden = 1
    switch(input(src,"Select a character slot to delete", "Slots", text)in list("1","2","3","4","Nevermind"))
        if("1")
            slot = 1
            client.Del(slot)
            slot = 0
            ..()
        if("2")
            slot = 2
            client.Del(slot)
            slot = 0
            ..()
        if("3")
            slot = 3
            client.Del(slot)
            slot = 0
            ..()
        if("4")
            slot = 4
            client.Del(slot)
            slot = 0
            ..()
        if("Nevermind")
            return
var/tmp/slot = 0
//mob/proc/load()

client
  proc
    Save(slot)
      var/savefile/F = new("[ckey].sav")
      F["[slot]"] << mob
    Load(slot)
      var/savefile/F = new("[ckey].sav")
      F["[slot]"] >> mob

mob
  Write(var/savefile/F)
    ..()
    F["x"] << x
    F["y"] << y
    F["z"] << z
  Read(var/savefile/F)
    ..()
    loc = locate(F["x"], F["y"], F["z"])
    return


mob/Logout()
    view () << "<small>[src.ckey] has logged out!"
    client.Save(slot)
    ..()

<small>
<font color=green>
runtime error: Cannot execute null.Save().
proc name: Logout (/mob/Logout)
usr: Darkjohn66 (/mob)
src: Darkjohn66 (/mob)
call stack:
Darkjohn66 (/mob): Logout()
Darkjohn66 (/client): Load(1)
Darkjohn66 (/mob): Newchar()
runtime error: bad client
proc name: Newchar (/mob/verb/Newchar)
usr: Darkjohn66 (/mob)
src: Darkjohn66 (/mob)
call stack:
Darkjohn66 (/mob): Newchar()</small></font color=green>

Newchar is the verb I am executing when I click on button in skin.
Apr 2 2010, 8:46 pm
In response to Darkjohn66
client is null when Logout() is called, because Logout() is called in response to client being changed. Move the call to the save procedure to client/Del().

Also, there's no reason to have that duplicated code in the switch() statement. All you should have there is "slow = input() in list()" and then an "are you sure?" message.
Apr 3 2010, 9:00 am
In response to Garthor
This is really getting agrivating the amount of time I am spending on this /=. I changed this to client/Del() and once again got another error, I tried changing everyhing to use mob in the save and load procs but nothing seems to work. This is so hard!
Apr 3 2010, 11:33 am
In response to Darkjohn66
Fixing a fundamentally broken system is always more difficult than just doing it right the first time.
Apr 3 2010, 2:55 pm
In response to Garthor
Can you please show me how I would go about setting up a slot? Please? /=. I have been trying hard and spending a large amount of time on this. I mean like actually doing a slot for me so I could set up the other 3...
Page: 1 2